INSTRUCTIONS FOR USE
Instructions for Use WITH the Remote Control
Press and hold the POWER button on the side of the stimulator
1.
unit for 2-seconds; the display will illuminate.
Press and hold the POWER button on the remote for 2-seconds;
2.
the left most green light will illuminate and stay lit while the
remote is in use; the remote is automatically paired with the
stimulator if both devices are powered ON.
3.
The stimulator will begin working at the lowest intensity level
and program; begin with the lower intensity levels and gradually
progress to more advanced levels as you feel comfortable.
4.
INTENSITY SETTING—ON THE REMOTE press and release the '+'
button to find your desired therapy sensation level. This device
offers 20 intensity levels. Press and release the '—' button to
reduce the intensity level.
5.
MODE SETTING— While the unit is
on/operating, press and hold the
'+/MODE' button; the mode will
switch to the next in the sequence
of 8 pulse types. See page 20 for a
detailed description of each pulse
type. When changing modes,
the intensity will revert to level 0
(lowest sensation).
MODE SETTING
When changing
modes, the second
green light will blink
for each level – ie once
for L1, 2x for L2, etc.
The display on the
stimulator will also
change to reflect the
selected mode
ENGLISH • 25