Commissioning - SOMFY Oximo 40 WF RTS Manual De Instrucciones

EN

2.3. COMMISSIONING

Before commissioning, check if the product is in stand-by by pressing the Up or Down button. If the motorised

product does not respond, it is in stand-by (see step 2.3.5 to activate it).
Identifying the steps to follow
The end limit setting depends on the type of roller blind:
For a roller shutter with rigid links
and with stops
No adjustment necessary: the end limits are
set automatically.
Check the robustness of the roller

shutter and its fittings.
For information about the compatibility
of the drive with the roller shutter and
accessories, contact the roller shutter
manufacturer or Somfy.
Step 3:
Automatic setting of end limits
(2.3.4.a)
4
Step 1: Pre-programming the control point (2.3.1)
Step 2: Controlling the direction of rotation (2.3.2)
For a roller shutter without rigid
links and without stops
The upper and lower end limits must be set in
manual mode.
Step 3:
Setting the end limits in manual
mode (2.3.4.b)
Step 4: Programming the control point (2.3.5)
OPERATION
Copyright © 2017-2018 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved.
For a roller shutter without rigid
links and with stops or with rigid
links and without stops
The upper or lower end limits must be set in
semi-automatic mode.
Step 3:
Setting the end limits
in semi-automatic mode (2.3.4.c)