12. Connecting microphones
The microphone can be used in any operating mode.
You can use up to 2 microphones at the same time. Additional microphones can be
purchased from specialist retailers.
You can use microphones to amplify your voice.
Follow these steps to connect the microphones:
If necessary, switch off the party sound system.
Plug the microphone into the microphone socket you want to use, MIC 1 or MIC 2.
Slide the microphone switch to the ON position.
Use the
MIC VOL. controller to select
Press the ECHO button to use the echo function.
Press the ECHO button again to switch off the echo function.
After use, slide the microphone switch to the OFF position.
Instructions for using microphones from other manufacturers can be
found in the corresponding instructions.
13. Cleaning
Always disconnect the device from the mains before cleaning it.
Only use a dry, soft cloth to clean the device. Do not use chemical solutions
or cleaning products because these may damage the device's surface and/or
inscriptions.
Make sure that no liquid gets inside the party sound system.
14. Storing the device when not in use
If you do not intend to use the device over a longer period of time, store it
in a cool, dry place and make sure that it is protected from dust and extreme
temperature fluctuations.
176
the desired announcement volume.