Rear Covers, Night Blinds (Fig. 8); Combining Cabinets (Rif. 23); Maintenance And Cleaning - Qualified Operator - Arneg Coimbra 2 VCA Serie Manual De Instalacion Y Uso

Coimbra 2
VCA-VPA-VCB-SELF-H125
English
4 - Replace the lamp group with a new one that is identical
5 - Retighten the PVC springs of the holes
6 - Re-insert the lamp group inside the aluminum profile until it clicks

19.Rear covers, night blinds (Fig. 8)

To avoid unnecessary dispersions of cold and to ensure hygiene of the goods exposed
during night time hours or in the event of electrical suspension, rear sliding closures
(VCA version) or night blinds (self version H125-150) are available..
For cabinets that have inner lighting, turn off the lights before closing the cabinet.

20.Combining cabinets (Rif. 23)

Before multiplexing the units make sure that they are level.
To combine two or more cabinets in channel, proceed as follows:
1 - Disassemble the shoulders (if present).
2 - Position the cabinets side by side
3 - Join the risers and the brackets, using the screws supplied
CHANNEL COMBINATION KIT
Ref. Code:
1 02940045
2 02940652
3 04230600
4 04711065
5 04520006
6 04710044
7 04480112
8 04710066
9 04230400
10 04480103

21.Maintenance and cleaning - qualified operator -

The food products can rotten due to microbes and bacteria. Compliance to the hygiene
norms is essential to safeguard the health of the consumer, in addition to compliance to
the cold chain, of which the sales area represents the last ring that can be monitored.
The cleaning operations must include:
4 - WASH (roughing, removal of approximately 97% of the dirt)
5 - DISINFECTION (deterge the surfaces to eliminate pathogenic micro-organisms that
have remained after the wash).
6 - RINSING
7 - DRYING
Cleaning of the refrigerated cabinets is divided as follows:
36
General
Alignment pin dd 3x40
Alignment pin dd 4x80
Hex Nut M8
Screw TCEI M8x120
Bush M4
Screw
Washer 8.5x24
Screw TCEI M6x80
Nut M6
Washer 6x12
05060143 00 10/04/2013