Jocel JP4EV010100 Manual De Instruciones página 31

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

- To install your appliance above cupboard with
drawer
When the air outlet is underneath the hob:
Ideally, an air outlet grille should be placed between
the hotplate and the cupboard door. It will be easy to
install if the cross bar is small.
If the cross bar is rectangular or the
hotplate is closed off, make a beveled cut
to free the air outlet.(shown in figure 3)
- To install your appliance above an oven
The hotplate may be flush-mounted above an oven of the same brand. This oven has
an upper ventilation system and can therefore be installed in a high position. To do this,
remove the front cross bar of the cupboard to leave a minimum space of 5 mm free.
3.Electrical connection.
This appliance must be installed by a qualified person in accordance with the latest
edition of the I.E.E. Regulations and in compliance with our instructions.
Before connecting the appliance, make sure that the supply voltage marked on the rating
plate corresponds with your mains supply voltage.
WARNING: THIS APPLIANCE MUST BE EARTHED.
This appliance must be wired into a 30A double pole switched fused spur outlet, having 2,5 mm contact
separation and placed in an easily accessible position adjacent to the appliance. It should not be located
above the appliance and no more than 1.25m away from it.
The spur outlet must still be accessible even when your hob is located in its operating position.
Figure 3
-30-
4.7cm min
Tabla de contenido
loading

Tabla de contenido