Mowing - Murray LT155420 Manual De Instrucciones

How to Stop the Unit
1. Completely push the clutch/brake pedal forward
to stop the unit. Keep your foot on the pedal.
2. Move the blade rotation control to the
DISENGAGE position.
3. Move the shift lever to the NEUTRAL position.
4. Set the parking brake.
WARNING: Make sure the parking brake will
hold the unit.
5. Move the throttle control to the SLOW position.
6. To stop the engine, turn the ignition key to the
STOP position. Remove the key.
How to Transport the Unit
To transport the unit, follow the steps below.
1. Move the blade rotation control to the
DISENGAGE position.
2. Raise the lift lever to the highest position.
3. Move the throttle control to the FAST position.
4. To go faster, move the shift lever to a faster
speed.

Mowing

How to Operate with the Mower Housing
WARNING: The deflector is a safety device.
Do not remove the deflector. The deflector
forces the discharged material toward the
ground. Always keep the deflector in the
down position. If the deflector is damaged,
replace the deflector with an original
equipment part from an authorized service
center.
IMPORTANT: When you operate with the mower
housing, always operate with the throttle control in the
FAST position.
1. Start the engine.
2. Move the lift lever to a height of cut position. In
high or thick grass, cut the grass in the highest
position first and then lower the mower housing
to a lower position.
CAUTION: Do not operate with the mower housing
in the LEVEL ADJUSTMENT position. If you
operate in the LEVEL ADJUSTMENT position, the
mower housing and blades can be damaged.
3. Move the throttle control to the SLOW position.
4. Slowly move the blade rotation control to the
ENGAGE position.
5. Push the clutch/brake pedal completely forward.
6. Move the shift lever to one of the speed settings.
English
16
NOTE: When you mow in heavy grass or mow
with a bagger, put the shift lever in the slowest
speed.
7. Slowly release the clutch/brake pedal.
8. Move the throttle control to the FAST position. If
you need to go faster or slower, stop the unit and
move the shift lever to another speed setting.
9. Make sure the level of cut is still correct. After
you mow a short distance, look at the area that
was cut. If the mower housing does not cut level,
see the instructions on "How To Level The
Mower Housing" in the Maintenance section.
WARNING: For better control of the unit,
always select a safe speed.
Reverse Mowing Option (RMO)
WARNING: Mowing in reverse can be
hazardous to bystanders. Tragic accidents
can occur if the operator is not alert to the
presence of children. Never activate RMO if
children are present. Children are often
attracted to the unit and the mowing
activity.
1. Engage the blades.
2. Insert the supplied key into the RMO switch,
located to the right of the steering wheel bellows
(Figure 14).
3. Turn the key. The L.E.D. light will illuminate,
indicating thet the RMO feature has been
activated. The mower deck can now be operated
while the unit is traveling in reverse.
4. The reverse mowing option is deactivated when
the blades are disengaged, and must be
reactivated each time the blades are engaged, if
desired.
5. Remove the key to restrict access to the RMO
feature.
WARNING: The engine will shut off if the
speed control pedal is moved into reverse
while the blades are engaged and the RMO
is not activated.
murray.com