Wiring; Attachment Of Motor Housing - Craftmade WarPlanes WB348 Guia De Instalacion

6. Wiring.

CAUTION: Be sure outlet box is properly grounded and that a
ground wire (GREEN or Bare) is present.
Make sure all electrical connections comply with Local Codes or
Ordinances and the National Electrical Code. If you are
unfamiliar with electrical wiring or if the house/building wires
are different colors than those referred to below, please use a
qualified electrician.
When fan is secured in place on the mounting plate, electrical
wiring can be made as follows:
Connect BLACK wire from fan to BLACK wire from ceiling
with wire connector provided.
Connect WHITE wire from fan to WHITE wire from ceiling
with wire connector provided.
Connect all GROUND (GREEN) wires together from fan to
BARE/GREEN wire from ceiling with wire connector provided.
* Wrap each wire connector separately with electrical tape as
an extra safety measure.

7. Attachment of Motor Housing.

Loosen large motor housing screw on side of
motor housing, as shown in diagram to the right.
Raise motor housing to mounting plate, align
hole on mounting plate with loosened screw on
motor housing. Twist motor housing to lock.
Secure motor housing to mounting plate by
tightening large motor housing screw.
BLACK
BLACK
motor housing
page 5
outlet box
GROUND/GREEN
WHITE
WHITE
mounting
plate
large screw
hole