Fan Assembly - Craftmade WarPlanes WB348 Guia De Instalacion

5. Fan Assembly.

With the hanging bracket secured to the outlet
box and able to support the fan, you are now
ready to hang your fan.
Tip: Seek the help of another person to hold
the stepladder in place and to lift the fan up to
you once you are set on the ladder.
Find a secure attachment point (wood ceiling
joist highly recommended) and secure safety
cable. It will be necessary to use a heavy duty
wood screw, washer and lock washer (not
supplied) with the safety cable loop. [Refer to
diagram 1.] If necessary, adjust the loop at the
end of the safety cable. The loop at the end of
the safety cable should just fit over the threads
on the wood screw. Extra cable slack can be
left in ceiling area.
Raise motor housing to mounting plate and
attach loop on safety cable to j-hook on
mounting plate. [Refer to diagram 2.] This will
allow the motor housing to hang out of the
way while wiring.
NOTE: The important safety precautions and
instructions appearing in the manual are not
meant to cover all possible conditions and
situations that may occur. It must be understood
that common sense and caution are necessary
factors in the installation and operation of this fan.
wood
ceiling
joist
diagram 1
mounting plate
loop
motor housing
diagram 2
page 4
wood screw
safety cable
j-hook