Settings Page - Urmet mikra plus Manual De Configuración

After selecting the operating language with the icon
parameters of the door unit and access the following pages:
– BUTTONS
(*) Depending on the parameters previously entered.
– TRANSFER
– V.x.y/w/z (**) (e.g.
(**) V.x.y is the SW version of the Web application, while w and z are the FW versions of the button
panel.
B.9. After completing the changes, save and send the configuration to the device with the control
The browser returns the following screens:
1)
B.10. By pressing on the controls
B.11. In the meantime, the device has rebooted.

3.1.1 SETTINGS PAGE

The following default settings will be present at the opening of the web page:
DOOR UNIT TYPE: MAIN
All parameters are described below:
DOOR UNIT TYPE
This parameter is used to set the door unit as "PRIMARY" or "SECONDARY". All the users in the system may be
called from the main door unit. A secondary door unit may only call the users of the riser to which it belongs. Users
who receive the call can identify the source of the call by the tone.
If the value "SECONDARY" is selected, new parameters are displayed on the web page and are
described in chapter DOOR UNIT TYPE: SECONDARY.
MAIN DOOR UNIT ADDRESS
Set the identification number (ID) of the door unit to a value from "0" to "3". No two main units can have the same
ID.
DOOR OPENER TYPE
This is used to manage lock door opener mode; possible options are "FREE" or "SECRET".
In "SECRET" mode, the electric lock may only be activated by pressing the door opening button on the calling
station when an audio conversation has been established or when after having received a call or auto-on function
either a video connection has been established.
In "FREE" mode, instead, the apartment station door opener button will only open the door unit electrical lock only
if the door unit is configured as main or the user belongs to the same door unit column. This column is defined by
the secondary door unit ID setting. This function is typically used for secondary stations.
The above applies to the vehicle (gate) and pedestrian gate electrical lock.
DS1784-003
: to consult/change(*) the button allocation to the columns in the system.
: to save/import the configurations set on the device.
): which shows the firmware version of the device.
on the TRANSFER
is returned, therefore close the browser.
at the top left, you can configure all the
web page.
2)
, the web page with the indication
21