End Of Programme; Switching Off The Dishwasher - Miele PFD 104 SCVi Instrucciones Breves De Manejo

End of programme

At the end of a programme, the in-oper-
ation indicator light will flash slowly with
the door shut. The buzzer might also
sound.
The in-operation indicator light will go
out 10 minutes after the end of the pro-
gramme if the door is closed.
The programme has ended when the
display shows the message 
In some programmes, if the "AutoOpen"
function is activated, the door will auto-
matically open slightly. This improves
the drying process.
If the Consumption
tion is activated, you can now view the
actual water consumption of the pro-
gramme which has just finished.
The drying fan may continue to run for
a few minutes at the end of the pro-
gramme.

Risk of damage due to steam.
Steam from the dishwasher could
damage the edges of worktops when
you open the door at the end of the
programme if the fan is no longer
running.
If you have deactivated the auto-
matic door opening function but
would still like to open the door at
the end of the programme, then
make sure that you open the door
fully.
Finished
programmable func-

Switching off the dishwasher

 Open the door.
 The dishwasher can be switched off
at any time using the  sensor con-
trol.
 Confirm the query
with OK.
Switching the dishwasher off during a
programme stops the programme.
.
You can also do this to stop an ongoing
timer.
 If you have touched the  sensor
control, but in fact do not wish to
cancel the programme, use the
 button to select the
option on the display and confirm
with OK.

Risk of damage from leaking wa-
ter.
Water leakage can cause damage.
If the dishwasher is not going to be
used for a longer period of time, e.g.
whilst on holiday, the stopcock
should be closed as a precaution.
en - Operation
Switch appliance off
Do not switch off
47