Transport (Fig. 3); Receipt And First Cleaning; Installation And Environmental Conditions (Fig. 4) - Arneg Berlino 3 Manual Del Usuario

5) Supply voltage
6) Power frequency
7) Input current
8) Electric power absorbed during the refrigeration phase (Fans + hot cables + lighting)
9) Electric power absorbed during the defrosting phase (Hot cables + fans + evaporators + lighting)
10) Lighting power (where foreseen)
11) Net display surface
12) Net load volume
13) Type of refrigerant fluid with which the plant operates
14) Environment climatic categories and reference temperature
15) Protection class against humidity
16) Job order number with which the cabinet has been manufactured
17) Order number with which the cabinet has been produced
18) Cabinet year of production
In case of technical assistance, in order to identify the cabinet communicate the following:
- the product name (2); the serial number (4); the job order number (16)

5. Transport (Fig. 3)

The cabinets are supplied on a wooden support fixed to the base for movement with forklift trucks.
Always position the forks at the point specified on the wooden support to avoid the risk of
overturning. Use a manual or electrical forklift truck that is suitable to moving the cabinet in question.
It must have a nominal capacity of at least 1,000 kg.

6. Receipt and first cleaning

On receiving the cabinet:
- make sure that the packaging is integral and no evident damage is present;
- remove the packaging with care so as not to damage the cabinet;
- check all parts of the cabinet ensuring that its components are integral;
- if damaged, immediately call the supplier;
- use neutral products for a first cleaning of the cabinet. Dry with a soft cloth, do not use abrasive
substances or metallic sponges
- do not use alcohol or similar products for the methacrylate parts (plexiglass).
For a correct disposal of the packaging take into consideration that it consists of:
Wood - Polyester - Polythene - PVC - Cardboard.
In compliance with the EEC 94/62 directive the suitability of the materials stated above is declared.

7. Installation and environmental conditions (Fig. 4)

For installation, follow the instructions below:
- Do not position the cabinet:
- in places containing explosive gaseous substances;
- in the open air and, therefore, exposed to atmospheric agents;
- near sources of heat (direct sunlight, heating appliances, incandescent lights, etc.);
- near air currents (near doors, windows, air-conditioning systems, etc.) that should not exceed the
speed of 0.2 m/s.
- Remove the wooden supports on the base (used for transportation) and mount the adjustable feet
(Rif. 2) regulating them so as to position the cabinet horizontally; use a level (Rif. 1) to make sure of
its positioning.
- After moving the cabinet, check leveling.
- Remove the wooden protections located on the cabinet top.
- Install the cabinet keeping a min. distance of 60 mm from any other surface.
- Before connecting the cabinet to the electric supply, make sure that all the data on the nameplate
corresponds to the characteristics of the electrical system to which it will be connected.
- In order for the cabinet to operate correctly, the temperature and the environmental relative humidity
must respect the parameters indicated in norm EN-ISO 23953 - 1/2 that provides a Climatic Class 3
(+25°C; R.H. 60%).
ATTENTION!: Install a maximum of 3 cabinets in line on the same power and refrigeration chan-
nel (1 Master + 2 Slaves).
N.B.All these operation should be performed by specialized technical personnel only.
05060070 02 17/05/2010
Berlino 3
English
31