HoMedics MCS-100 Manual De Instrucciones E Información De Garantía página 3

• This unit should not be used by children or invalids without
adult supervision.
Caution:
• This product is not for use in automobiles.
To avoid pinching
Instructions for Use
do not lean
The Shiatsu Massaging Cushion comes with a screw located on the back
on Shiatsu
of the unit to protect the massage mechanism during shipment, which
back massage
must be removed before the first use to allow the shiatsu feature to
mechanism in
function. Use the provided allen wrench. Warning - Failure to remove
the cushion when
screw may cause permanent damage to the massage cushion.
adjusting your
Strapping System
body position.
The Shiatsu Massaging Cushion incorporates a unique strapping
system which allows you to fasten it to almost any chair. Just slip the
Do not jam or
straps over the seat or chair and adjust fastening straps to secure.
force any part of
Your massager won't slip or slide away.
your body in the
Maintenance
moving massage
mechanism.
To Store
Place massager in its box or in a safe, dry, cool place. Avoid contact
with sharp edges or pointed objects which might cut or puncture the
fabric surface. To avoid breakage, do not wrap the power cord around
the unit.
To Clean
Unplug the unit and allow it to cool before cleaning. Clean only with a
soft, slightly damp sponge. Never allow water or any other liquids to
come into contact with the unit.
• Do not immerse in any liquid to clean.
• Never use abrasive cleaners, brushes, gasoline, kerosene,
glass / furniture polish or paint thinner to clean.
• Do not attempt to repair the Shiatsu Massaging Cushion.
There are no user serviceable parts. For service, send the
unit to the HoMedics address listed in the warranty section.
4
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
Please note:
this device must accept any interference received, including interference that may
Not recommended
cause undesired operation.
for use on wooden
Note: The manufacturer is not responsible for any radio or TV interference caused by
surfaces as
unauthorized modifications to this equipment. Such modifications could void the user
the zipper may
authority to operate the equipment.
damage the wood.
Caution is also
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
recommended
to provide reasonable protection against harmful interference in a residential
when using on
installation. This equipment generates, uses, and can radiate radio frequency
upholstered
energy and, if not installed and used in accordance with the instructions, may cause
furniture.
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
NOTE: Only gentle
harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
force should be
interference by one or more of the following measures:
exerted against
the unit in order
• Reorient or relocate the receiving antenna.
to eliminate any/
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
all risk of injury.
to which the receiver is connected.
You may soften
• Consult the dealer or an experienced radio/TV technician for help.
massage force by
placing a towel
between yourself
and the unit.
5