Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Using speaker:
1.- When the phone rings, press speaker key (18) and begin the
conversation.
2.- When fi nishing the conversation, press speaker key (18) once
again.
To receive the caller ID data correctly, please answer the
To receive the caller ID data correctly, please answer the
phone after twice rings.
phone after twice rings.
There should be a 6 seconds gap (minimal) between two
There should be a 6 seconds gap (minimal) between two
calls. Otherwise you cannot receive the caller ID data
calls. Otherwise you cannot receive the caller ID data
correctly.
correctly.
RINGTONE
Your phone set has up to 8 different types of ring tones, to
choose one of them, follow these steps:
1.- Press Hold / Ring (11). You can hear the current ring tone.
2.- Use Up / Down (2/3) buttons to move over the ring tone list.
MUSIC ON HOLD
If you need to do something during a conversation, and you don't
want to cut the current call, press Hold / Ring (11) and place the
handset on the base. Making this you don't cut the call and the
other person will hear a background music. When you need to
resume the call, just pick the handset up or press speaker key
(18).
REVIEWING OUTGOING CALLS
1.- Press Out (5). Dialed numbers appears on LCD screen.
2- Press Out (5) once again, to visualize all dialed numbers
stored on memory.
3.- If you reached the end of the list or there are not any stored
dialed number, the message End appears on LCD screen.
Erasing dialed numbers:
1.- Press Out (5). Dialed numbers appears on LCD screen.
2- Press Out (5) until you visualize the desired dialed number
that you want to erase.
3.- Press Del (4), The number (s) will be deleted from memory.
If you press Del (4) for more than 3 seconds, all dialed
If you press Del (4) for more than 3 seconds, all dialed
number stored in memory will be erased.
number stored in memory will be erased.
ENGLISH-7
Tabla de contenido
