Shaft With Industrial Attachment - Carlo De Giorgi F 80 NEW Manual De Instrucciones De Uso Y Mantenimimento

4.1.2 – Shaft with industrial attachment
Procedure (Ref. Fig. 4):
1) unscrew metal collar (1) and slide it down the flex shaft sheath;
2) insert the attachment on the motor shaft, unscrewing the three grub
screws (2) if necessary;
3) tighten the grub screws with a 2 mm Allen wrench;
4) screw collar (1) onto the flex shaft sheath and the motor (3).
NOTE THAT OPERATORS ARE REQUIRED TO USE INDIVIDUAL
PROTECTION DEVICES AT ALL TIMES (SAFETY GLASSES).
Always disconnect the appliance after use by unplugging the power
cable from the mains socket outlet.
GB - 8
3
2
1
PENDANT MOTORS
Fig. 4
Carlo de Giorgi