Start The Machine; Stop The Machine; Operation Tips; Cutting Tips - GreenWorks Pro STC460 Manual Del Operador

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

2. Put on the shoulder strap.
3. Adjust the length of the strap so that the carabiner is
about a hand's width below your right hip.
9.3

START THE MACHINE

1. Push the on/off button (1).
2. Push the lock-out button (2) rearward.
3. Pull the trigger (3).
9.4

STOP THE MACHINE

1. Release the trigger.
2. Push the on/off button again to turn the machine off.
9.5

OPERATION TIPS

WARNING
Keep clearance between the body and the machine.
WARNING
Do not operate the machine without guard in place.
Do these tips when you use the machine
Keep the machine connected to the correctly worn
harness.
English
Keep a firm hold with the two hands on the machine
while you operate the machine.
Cut tall grass from the top down.
If grass winds around the trimmer head:
Remove the battery pack.
Remove the grass.
9.6

CUTTING TIPS

Tilt the machine toward the area to be cut. Use the tip of
the cutting line to cut grass.
Move the machine from right to left to prevent thrown
debris toward the operator.
Do not cut in the dangerous area.
Do not force the trimmer head into uncut grass.
Wire and picket fences cause cutting line wear and
breakage. Stone and brick walls, curbs, and wood can
wear the cutting line quickly.
9
EN

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

60t16

Tabla de contenido