Operation - Dimplex PRISM 74 El Manual Del Propietario

Operation

Figure 12
WARNINg: this electric firebox
must be properly installed before
it is used.
the unit can be controlled by
either the manual controls which
are located on the upper right of
the fireplace or the remote (Figure
12 & 13).
the fireplace is supplied with an Ir
multifunction remote control.
! NOTE: to operate correctly, the
remote control must be pointed
towards the Floating Display
A. Standby
turns the unit on and off.
→ Activated by pressing the
Standby button on the remote
or the unit.
• The unit will turn on with the same
Floating
Display
TM
.
TM
A C
D
E
functions that it was set to when
it was turned Off and the intake
temperature will be indicated on
the Floating Display
! NOTE: When any button is
pressed the intake temperature
will be displayed on the Floating
Display for 5 seconds.
TM
B. Flame Effects
turns the flame effect on and off.
→ Activated by pressing the
button on the remote.
C. Heat ON/OFF
turns the heater on and off.
→ Activated by pressing the
button on the unit or the remote.
• Indicated by the
the intake temperature being
F
Figure 13
A
B
D
F
.
TM
icon and
C
E
g
H
15