DeWalt DE6900 Manual Del Usuario página 15

Spindle moulding (fig. A)
For spindle moulding applications, the router is installed in the inverted
position. The Router Table is mounted securely using the legs (7) and the
fixing plates (8).
Spindle moulding using the side fence (fig. H)
• Position the cutter horizontally using the router position adjuster (15).
• Adjust the depth of cut using the cutting depth fine adjuster DE6956 (20).
• Guide the workpiece along the side fence (2), preferably using the
pressure pad (12).
Feed the workpiece as indicated by the arrow on the side of
the table.
Using the copy follower and thrust block (fig. I)
The copy follower (22) allows the user to work without the large fence (2)
(freehand routing).
• Mount the copy follower (22) and the thrust block (23) as shown.
• Put the ball bearing guide (24) in the correct position above the cutter.
• Tighten all knobs securely.
• With the router OFF, try a practice run to make sure that all points can
be moulded as required.
The thrust block (23) ensures your workpiece is always guided to the
correct side of the cutter.
Using a template
• Position the ball bearing (24) over the cutter, making sure the centres
of the two are in line.
• Prepare a template. The difference between bearing and cutter
diameter corresponds to the difference between workpiece and
template dimensions.
• Secure the template to the workpiece using double-sided tape.
• With the router OFF, try a practice run to make sure that all points can
be moulded as required.
For the correct position of the ball bearing (24), refer to fig. J:
• A Edge moulding with bearing off-centre.
• B Trimming facing material flush to edge of workpiece with a
trimming cutter.
• C Edge moulding following template contour.
Maintenance
Your D WALT attachment has been designed to operate over a long
E
period of time with a minimum of maintenance. Continuous satisfactory
operation depends upon proper tool care and regular cleaning.
Lubrication
Your attachment requires no additional lubrication.
Cleaning
Regularly clean the attachment with a soft cloth.
Unwanted products and the environment
Take your attachment to an authorized D
be disposed of in an environmentally safe way.
9
WALT repair agent where it will
E
GUARANTEE
• 30 DAY NO RISK SATISFACTION GUARANTEE •
If you are not completely satisfied with the performance of your
D WALT tool, simply return it within 30 days, complete as purchased,
E
to a participating Dealer, or an authorized D
full refund or exchange. Proof of purchase must be produced.
• ONE YEAR FREE SERVICE CONTRACT •
If you need maintenance or service for your D
months following purchase, it will be undertaken free of charge at an
authorized D WALT repair agent. Proof of purchase must be
E
produced. Includes labour and spare parts for the attachments.
Excludes accessories.
• ONE YEAR FULL WARRANTY •
If your D WALT product becomes defective due to faulty materials or
E
workmanship within 12 months from the date of purchase, we
guarantee to replace all defective parts free of charge or, at our
discretion, replace the unit free of charge provided that:
• The product has not been misused.
• Repairs have not been attempted by unauthorized persons.
• Proof of purchase date is produced.
This guarantee is offered as an extra benefit and is additional to
consumers statutory rights.
For the location of your nearest authorized D
please use the appropriate telephone number on the back of this
manual.
E N G L I S H
WALT repair agent, for a
E
WALT tool, in the 12
E
WALT repair agent,
E
en - 3