DeWalt DE6900 Manual Del Usuario página 13

ROUTER TABLE ACCESSORY KIT DE6900
Congratulations!
You have chosen a D WALT product. Years of experience, thorough
E
product development and innovation make D
reliable partners for professional users.
Table of contents
Technical data
Manufacturer's declaration
Safety instructions
Package contents
Description
Assembly and adjustment
Instructions for use
Maintenance
Guarantee
Technical data
Router table (width x depth)
Side fence
Max. cutter diameter
Work height
Weight
The following symbols are used throughout this manual:
Denotes risk of personal injury, loss of life or damage to the
tool in case of non-observance of the instructions in this
manual.
Denotes risk of electric shock.
Manufacturer's Declaration
DE6900
D WALT declares that the attachment mentioned above has been
E
designed in compliance with 89/392/EEC.
This attachment must not be put into service until it is established that the
Power Tool to be connected to it is in compliance with 89/392/EEC
(identified by the CE-marking on the Power Tool).
Director Engineering & Product Development
Horst Großmann
D WALT, Richard-Klinger-Straße 40,
E
D-65510, Idstein, Germany
7
WALT one of the most
E
DE6900
mm 240 x 210
mm 240 x 135
mm 35
mm 275
kg 2.8
Safety instructions
Observe the safety regulations in the instruction manual of the Power
Tool to be connected to this attachment. Also observe any applicable
additional safety rules. Read the following safety instructions before
attempting to operate this product.
Keep these instructions in a safe place!
en - 1
en - 1 The attention of UK users is drawn to the "woodworking machines
regulations 1974" and any subsequent amendments.
en - 1
en - 2
General
en - 2
• Always mount the Router Table in conformity with the present instructions.
en - 2
• Keep children away.
en - 2
en - 3 • Dress properly. Do not wear loose clothing or jewellery. They can be
caught in moving parts. Preferably wear rubber gloves and non-slip
en - 3
footwear when working outdoors. Wear protective hair covering to
keep long hair out of the way.
• Do not use the Router Table outdoors in the rain or in a damp environment.
• The Router Table must be stable at all times.
• Keep the work top clear of foreign objects.
• Use the Router Table with the Power Tools and accessories specified
in this manual only.
• Secure the Power Tool carefully.
• For stationary use, we recommend the application of a no volt release
switch (e.g. 115 V: DE6781, 230 V: DE6782).
• Remove any nails, staples and other metal parts from the workpiece.
• Use sharp and undamaged accessories only.
• Before operation, inspect the Router Table, the Power Tool, the cable and
the plug carefully for signs of damage. Have any damage repaired by an
authorized D WALT repair agent before using the tool or Router Table.
E
• Keep the Router Table clean and in good condition for better and safer
performance. Follow the instructions for maintenance. Keep all controls
dry, clean and free from oil and grease.
• The workpiece must be properly supported at all times. For larger
workpieces, we recommend to integrate the DE6900 Router Table in a
larger table top.
• As woodworking produces dust and woodchips, the use of dust
extraction equipment is recommended. A dust extraction adaptor is
available as an option (DE6901).
• This Router Table is in accordance with the relevant safety regulations.
To avoid danger, it must only be repaired by qualified technicians.
Additional safety rules for cutters
• Always use cutters with a shank diameter corresponding to the size of
the collet installed in your tool.
• Always use cutters suitable for a speed of 30.000 min
accordingly.
• Never use cutters with a diameter exceeding the maximum diameter
indicated in the technical data.
E N G L I S H
-1
and marked
en - 1