Allmatic B.RO X40 DISPLAY Manual Del Usuario página 26

WARNING: the short pressure of the MENU button during the parameter selection returns the process to the previous point. For
example: the brief pressure of the MENU button in channel 1 enabling menu (the display shows CH01) returns the process to the
selection of the function (the display shows F00 or the last function selected).
6/20
Press and hold the MENU button until the display shows:
Enable/disable hte key of the transmitter in the channel 2 with UP (+) and
DOWN (-) buttons of the receiver.
If the key is enabled, the display shows:
Press and hold the MENU button until the display shows:
Enable/disable hte key of the transmitter in the channel 3 with UP (+) and
DOWN (-) buttons of the receiver.
If the key is enabled, the display shows:
Press and hold the MENU button until the display shows:
Enable/disable hte key of the transmitter in the channel 4 with UP (+) and
DOWN (-) buttons of the receiver.
If the key is enabled, the display shows:
Press and hold the MENU button until the display shows:
The receiver waits for a new key to be memorized.
To quit, press brie• y the MENU button or wait 10s of inactivity.
ITA ENG
The display shows:
FRA ESP DEU POR
6-1620020 rev.0 27/10/2015