mabe MMT09CABWCCCHI8 Manual Instructivo página 86

86
4. Connecting the cable
• Indoor Unit
Connect the power cord to the indoor unit by connecting the
wires to the terminals on the control board individually in accor-
dance with the outdoor unit connection.
Note: For some models, it is necessary to remove the cabinet to
connect to the indoor unit terminal.
• Outdoor Unit
1. Remove the access door from the unit by loosening the screw.
Connect the wires to the terminals on the control board indi-
vidually as follows.
2. Secure the power cord onto the control board with cable
clamp.
3. Reinstall the access door to its original position using the
screw.
4. Use a recognized circuit breaker for 24K model between the
power source and the unit. A disconnecting device to ad-
equately disconnect all supply lines must be fitted.
The illustrations in this manual are based on the exterior appear-
ance of a model, consequently, their appearance could differ from
that of the model you acquired.