Fagor 8H-755BB Manual De Instrucciones página 51

OPERATION
Timed operation
Timed operation involves setting the dura-
tion after which the appliance automatically
turns off. You can set the duration from 1
minute to 23 hours 59 minutes.
When the appliance is on or when you have
turned the function selector to a desired
function press the
the Duration. The
dur (duration) is displayed briefly for 1s and
then 0.00 (or current countdown if the func-
tion is already active). Turn the +/– to adjust
the Duration and then press the
sensor to confirm the setting or simply wait
5 seconds. The current time is displayed 5
seconds after you press the
sor.
The indicator is on during timed opera-
tion.
The heating and temperature functions can
be freely modified during the time delayed
operation.
To cancel timed operation set Duration to
0.00 and press the
5 s — the appliance will operate normally.
Once duration has elapsed, you will hear an
[end] beep. All heating elements are discon-
nected. You can silence the alarm as fol-
lows:
a) Do one of the following:
- press any touch sensor except
- turn the function selector knob;
- turn the +/– knob;
- open the door.
This will clear all function and temperature
settings. Even though the Function Selector
knob is set to a heating function, the appli-
ance will enter standby.
b) Turn the Function Selector knob to 0 - the
appliance will enter standby.
c) Press the touch sensor to set the new
Duration and continue cooking with cur-
touch sensor to set
indicator flashes and
touch
touch sen-
touch sensor or wait
;
rently set temperature and settings. Note -
in this case (when attempting to extend the
Duration when the beeping starts after the
Duration has elapsed), setting the time to
0.00 turns off the oven rather than allowing
it to operate indefinitely.
Delayed timed operation
You can set the appliance, so that its timed
operation is delayed and cooking ends at a
specific time.
You must first set the Duration (same as in
timed operation). Press the
sor to confirm Duration and end message
will be displayed briefly for 1s and then End
Time will be display calculated as Current
Time + Duration + 1 minute. Turn the +/–
knob to adjust the End Time. Press the
touch sensor to confirm End Time or wait 5
s to cancel. Once End Time is confirmed the
and indicators light up steadily and the
Current Time is shown again.
The and indicators are on during the
countdown to Start Time. The
cates when heating elements are on.
Press to view and modify the set dura-
tion. Pressing the sensor once to set Dura-
tion, press again to set End Time and press
again to display the current time. Set Dura-
tion to 0.00 to cancel both Duration and End
Time and allow the appliance to operate in-
definitely.
You can adjust End Time from (Current Time
+ Duration + 1 minute) to (Current Time +
Duration + 10 hours). You can modify Du-
ration (when End Time is set) from 0:00 to
(Duration – Current Time – 1 minute).
When you have finished cooking, set the
function selector knob to 0.
touch sen-
symbol indi-
51