Operation - Fagor 8H-755BB Manual De Instrucciones

OPERATION

Before using the oven for the first time
 Remove packaging, clean the interior of
the oven and the hob.

Take out and wash the oven fittings with
warm water and a little washing–up liquid.
 Switch on the ventillation in the room or
open a window.
 Heat the oven (to a temperature of 250°C,
for approx. 30 min.), remove any stains
and wash carefully.
Push-pull knobs
The oven function knob and the adjust set-
ting knob are concealed in the front panel.
To set the function and/or settings, gently
press and release the knob. The knob will
pop out of the panel. You can now set the
appropriate function and/or settings.
Important!
In ovens equipped with the electronic pro-
grammer, the time "0.00" will start flashing
in the display field upon connection to the
power supply.
The programmer should be set with the
current time. (See Electronic programmer ). If
the current time is not set operation of the
oven is impossible.
The electronic prgrammer is equipped with
electronic sensors which are switched on by
touching or pressing the sensor surface for at
least one second.
Each sensor reaction is confirmed by the beep.
Keep the sensor surface clean at all times.
Important!
The inside of the oven should only be washed
with warm water and a small amount of wash-
ing–up liquid.
45