Wiring - Craftmade Beacon BEA48 Guia De Instalacion

6. Wiring.

WARNING: Turn off circuit breakers to
current fixture from breaker panel and be
sure switch is turned to the OFF position.
CAUTION: Be sure outlet box is properly
grounded and that a ground wire (GREEN
or Bare) is present.
Make sure all electrical connections comply
with Local Codes or Ordinances and the
National Electrical Code. If you are
unfamiliar with electrical wiring or if the
house/building wires are different colors
than those referred to in the instructions
below, please use a qualified electrician
When downrod is secured in place on the
hanging bracket, electrical wiring can be
made as follows:
Connect BLACK and BLUE wires from fan
to BLACK wire from ceiling with wire
connector provided.
Connect WHITE wire from fan to WHITE
wire from ceiling with wire connector
provided.
Connect all GROUND (GREEN) wires
together from fan to BARE/GREEN wire
from ceiling with wire connector provided.
If you intend to control the fan light with a
separate light switch, connect BLUE wire
from fan to the BLACK (or RED) supply
from the independent switch.
* Wrap each wire connector separately
with electrical tape as an extra safety
measure.
white supply wire
black supply wire
from ceiling
black
white
white
black
blue
from fan
page 6
bare/ground
green/ground
*
motor
housing