About Hdmi - Pioneer DV-600AV-S Manual De Instrucciones

02
Connections
Note
• This unit has been designed to be
compliant with HDMI (High Definition
Multimedia Interface). Depending on the
component you have connected, using a
DVI connection may result in unreliable
signal transfers.
• When you change the component
connected to the HDMI output, you will
also need to change the HDMI settings to
match the new component (see HDMI Out
on page 39, HDMI Resolution on page 40
and HDMI Color on page 40 to do this).
However, the settings for each component
are then stored in memory (for up to 2
components).
• DV-600AV: The HDMI connection is
compatible with 2 channel linear PCM
signals (44.1 kHz to 192 kHz, 16 bit/20 bit/
24 bit), and Dolby Digital, DTS, MPEG
audio bitstream, multi channel DSD, and
multi channel linear PCM signals, (5.1
channel signals up to 96 kHz, 16 bit/20 bit/
24 bit).
• DV-400V: The HDMI connection is
compatible with 44.1 kHz/48 kHz, 16 bit/20
bit/24 bit 2 channel linear PCM signals, as
well as Doldy Digital, DTS and MPEG audio
bitstream.
16
En

About HDMI

HDMI (High Definition Multimedia Interface)
supports both video and audio on a single
digital connection for use with DVD players,
DTV, set-top boxes, and other AV devices.
HDMI was developed to provide the
technologies of High Bandwidth Digital
Content Protection (HDCP) as well as Digital
Visual Interface (DVI) in one specification.
HDCP is used to protect digital content
transmitted and received by DVI-compliant
displays.
HDMI has the capability to support standard,
enhanced, or high-definition video plus
standard to multi-channel surround-sound
audio. HDMI features include uncompressed
digital video, a bandwidth of up to five
gigabytes per second (with HDTV signals), one
connector (instead of several cables and
connectors), and communication between the
AV source and AV devices such as DTVs.
Resetting the output resolution to the
default setting with HDMI connection
Switch the player to standby then, using the
front panel controls, press
while pressing to switch the player back
to 576P/480P.
STANDBY/ON
DVD/USB
USB
STANDBY/ON
DV-600AV
STANDBY/ON
HDMI