SCAN 83 Serie Manual De Instrucciones página 2

2 UK - MOUNTING OF THE REVOLVING CONNECTING PIECE
1. Remove the top plate.
2. Drill the four holes of the template with an 8 mm drill (A) and remove the
residues with a vacuum cleaner.
3. Mount the gasket on the connecting piece. Please keep a distance to the
inner side (B).
4. Mount the revolving connecting piece with the screws and nuts.
5. The flue pipe must be provided with a slit fitting the guide pin of the
connecting piece (C). If not, a slit must be cut.
8 mm
A
C
Slit
B
Distance
Gasket