Adding/Deleting Rts And Rt Control Points - SOMFY HOME MOTION Oximo 50 S auto RTS Manual Del Usuario

Installation guide
7.1.4 Deleting the favourite position
Press the STOP/my button:
1)
The roller shutter starts to move and stops in
the favourite position (my).
Press the STOP/my button until the roller shutter
2)
moves up and down:
The favourite position (my) has been deleted.
7.2 Adding/Deleting RTS and RT
control points
The procedure for adding or deleting a control
point is the same.
7.2.1 RTS control point
Find an RTS control point (K) programmed in the
-
Oximo 50 S auto RTS motor.
Press and hold the PROG button on the program-
1)
med RTS control point (K) until the roller shutter
moves up and down:
The motor is in programming mode.
Briefly press the PROG button on the RTS control
2)
point (L) to be added or deleted:
The roller shutter moves up and down,
The RTS control point has been programmed
or deleted from the motor.
7.2.2 Inis RT/Inis RTS control point
Find an RTS control point (K) programmed in the
-
Oximo 50 S auto RTS motor.
Press and hold the PROG button on the program-
1)
med RTS control point (K) until the roller shutter
moves up and down:
The motor is in programming mode.
Form a contact between the metal PROG plate
2)
and the battery bracket on the Inis RT/Inis
RTS (M) :
The roller shutter moves up and down,
The Inis RT/Inis RTS (M) has been program-
med or deleted from the motor.
Copyright © 2008 Somfy SAS. All rights reserved.
Oximo 50 S auto RTS
1 2
my
Adding
1 2
PROG. PROG.
K
Deletion
1 2
PROG. PROG.
K
Adding
1 2
PROG.
PROG.
K
Deletion
M
1 2
PROG.
PROG.
K
my
L
L
M
M
M
M
57