General Information - Kong HALF ROLLY 890.02 Manual Del Usuario

CHAPTER

2 GENERAL INFORMATION

Users must read and perfectly understand
the information provided by the manufacturer
(hereinafter information)
the device. This information relates to
the characteristics, services, assembly,
disassembly, maintenance, conservation,
disinfection, etc of the device; even though
it does include some suggestions on how to
use the products, it must not be considered
as a true to life instruction manual.
WARNINGS AND
LIMITATIONS OF USE:
- This device must be used only by
physically suitable
(informed and educated) to use it and
with specific experience with handling
patients or, in training activities, by people
under the direct control of instructors/
supervisors capable of guaranteeing their
safety.
- Do not use the device until you have read
this entire operating manual.
- Before and after operation, all the checks
described in chapter 7 must be carried
out. If the user has any doubt about
the efficiency of the device, it must be
replaced immediately.
- To reduce the
transmission of infective diseases, clean
and disinfect the device as defined in
chapter 5.
- Strictly follow the information provided
by the manufacturer, improper use of the
device is dangerous.
- Incorrect use of the patient restraint
systems may cause damage to the
patient.
6
2
before using
people, trained
risk of exposure/
Original version in Italian dated 24/01/2017
- Use in combination with devices and/or
accessories other than those indicated
in paragraph 3.4 may be dangerous.
Always make sure that the devices are
compatible by consulting the information
provided by the manufacturer.
- Improper use, deformation, falls, wear,
chemical contamination, exposure to
temperatures below -30°C or higher than
+50°C for the textile/plastic components/
devices, and +100°C for metal devices,
are some examples of causes that may
reduce, limit or end the life of the device.
- Before any recovery operation, make
sure that the weight does not exceed the
capacity defined in paragraph 3.3.
- Avoid exposing the device to heat sources
or to contact with chemical substances.
Reduce direct exposure to sunlight to the
minimum necessary. At low temperatures
and in the presence of humidity, ice may
form. This, on textile devices, may reduce
flexibility and increase the risk of cuts
and abrasions.
- It is strictly forbidden to modify and/or
repair the device.
All our devices are tested/inspected piece
by piece in accordance with the procedures
of the Quality System certified according to
the UNI EN ISO 9001 standard. Laboratory
tests, inspections, information and norms
do not always manage to reproduce what
actually happens in practice, and so
performance under real usage conditions in
a natural environment can differ, sometimes
even considerably. The best information
can be gained by continual practice under
the supervision of skilled, expert, qualified
individuals.
Warning: not suitable
for use in ATEX environ-
ments (Directive 94/9/EC)