Changing Oil - Honda EM50is Manual De Explicaciones

1.CHANGING OIL

Drain the oil while the engine is still warm to assure rapid and complete
draining.
1.Remove the oil filler cap and oil drain plug to drain the oil.
2.Allow the used oil to drain completely, and then reinstall the oil drain
plug and a new sealing washer. Tighten the plug securely.
3.Refill with the recommended oil (see page 21) and check the oil level.
4.Wipe off all the spilled oil from the generator.
5.Reinstall the oil filler cap securely.
Wash your hands with soap and water after handling used oil.
NOTE:
Please dispose of used motor oil in a manner that is compatible with
the environment. We suggest you take it in a sealed container to your
local service station for reclamation. Do not throw it in the trash or pour
it on the ground.
OIL FILLER CAP
UPPER LEVEL
SEALING WASHER
OIL DRAIN PLUG
43