54 4.7 Fitting Injector Holder; 54 4.8 Hose 1 680 - Bosch CRI/CRIN 848H Manual Original

en 72 | CRI/CRIN 848H | Initial startup
4.7 Fitting injector holder
1. Insert the injector holder (Fig. 37, item 2) in the
mount (Fig. 37, item 1).
2. As shown in Fig. 37, item 3 for passenger car com-
mon rail injectors and in Fig. 37, item 4 for com-
mercial vehicle common rail injectors, the injector
holder must be fastened to the rubber buffer by the
knurled nut (Fig. 37, item 5).
3
4
2
1
Fig. 37: Fitting injector holder
|
1 689 989 087 2018-07-24
5
4.8 Hose 1 680 712 310
i
The hose 1 680 712 310 is included in the parts set
1 687 016 035 and is only required for connecting
the tester set CRI/CRIN 848H to the EPS 815.
¶
Connect hose 1 680 712 310 (Fig. 38, item 3) to
distributor (Fig. 38, item 1) and return terminal
(Fig. 38, item 2).
3
2
Fig. 38: Hose 1 680 712 310
1
Robert Bosch GmbH