Caring For Your Device; Interior - Exterior Cleaning - Brandt BOP7542X Instrucciones Para El Usuario

Caring for your device

Caring for your device

INTERIOR - EXTERIOR CLEANING

• Self cleaning of the cavity by pyrolysis
Warning
Remove the accessories and the wire shelves from the oven before starting a pyrolysis clea-
ning. Before proceeding with a pyrolysis cleaning of your oven, remove any significant over-
flows that may have occurred. Remove excess grease from the door with a damp sponge.
As a safety measure, the pyrolysis cleaning operation is only carried out after automatic door locking, it is
impossible to unlock the door.
Self-cleaning cycles:
- Pyro Max, a classic cleaning in 2 hours for a dirty (or very dirty) oven.
- Pyro Express quick cleaning in 59 minutes for a lightly soiled oven, available when the oven is already
hot!
- Pyro Eco only intervenes to replace the Pyro Express if your oven is not hot enough. The duration of
the cleaning is then 1.5 hours.
advice
Start a pyro Express just after cooking to take advantage of the heat accumulated in the
cavity. The oven then determines whether the residual heat is sufficient to obtain a good
cleaning result. Otherwise, a Pyro Eco starts automatically.
• Starting a pyrolysis
The programmer must display the time of day, without flashing. To activate the pyrolysis, turn the function
selector to Cleaning Pyrolysis. Select with the + and - keys the desired pyrolysis program then confirm with
the OK key, the pyrolysis starts.
As a safety measure, the cleaning operation is only carried out after the door has been automatically
locked, the symbol
display shows 0:00 and the door unlocks after the oven has cooled down. Return the function selector to 0.
30
appears in the display, the door cannot be unlocked. At the end of cleaning, the
3