System Specifications; S8 Elite ( No Accessories ); Accessories - ResMed S8 Elite System Manual De Instrucciones

S S
YSTEM PECIFICATIONS
S8 E ( A
LITE NO CCESSORIES
Performance: Operating pressure range: 4 to 20 cmH
Dimensions (H x W x D): 112 mm x 164 mm x 145 mm
Weight: 1.3 kg
Power Supply
Input range for
•
2.5A <140 VA (110 W) (maximum power consumption). Instantaneous peak
power consumption <340 VA.
Refer to the DC-12 converter instructions for DC ratings. Only use the ResMed
•
DC-12 converter for DC input.
Actual power consumption will vary, depending on factors such as the use of
accessories, height above sea level and ambient temperature. Power consumption
values for typical treatment conditions (using a breathing machine set to 0.5 L and
15 breaths/min with 2 m air tubing, and an
following table.
Device
S8 E
LITE
Power outlet for HumidAire 3i
Outlet range: 100–240V, 50/60Hz; 110V, 400Hz; 2.0A
Air Filter: Two-layered, powder-bonded, polyester non-woven fiber
Air Tubing: Flexible plastic, 2 m
Air Outlet: The 22 mm conical air outlet complies with EN 1281-1
IEC 60601-1 Classifications: Class II (double insulation), Type CF
Noise level: Radiated sound pressure is measured at <30 dBA at 10 cm H
1 m according to ISO17510
A
CCESSORIES
D C
ATA ARD
Dimensions (L x W x D): 65.04 mm x 22.15 mm x 0.85 mm
)
with
S8 E H A
LITE UMID
Pressure
(cmH O)
2
5
10
15
20
O
2
: 100–240 V, 50/60 Hz; 110 V, 400 Hz;
3i
IRE
mask) are given in the
U M
LTRA IRAGE
Power Power
(VA) (W)
18 7.6
23 11.6
30 15.9
39 20.7
S
O and
2
S
YSTEM PECIFICATIONS
33