Grundig BODYGUARD VCC 4950 C Manual Del Usuario página 22

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 33
INFORMATION
4­­
S hake out the filter, then wash it in hot soapy
water, rinse well and leave to air dry.
Caution
Never put the filter into the washing machine or
dry it with a hair dryer.
Ensure the filter is completely dry before you
put it back into the cleaner.
5­­
I f necessary place a new fitler in the holder and
insert the holder back into the cleaner.
6­­
R eplace or change the dust bag.
Clean­the­filter­of­the­exhaust­
airfan
1­­
R emove the filter holder by pressing the release
button (on the rear of the appliance).
2­­
R emove the filter from the filter holder.
3­­
S hake out the filter, then wash it in hot soapy
water, rinse well and leave to air dry.
Caution
Never put the filter into the washing machine or
dry it with a hair dryer.
Ensure the filter is completely dry before you
put it back into the cleaner.
4­­
Carefully replace all the parts.
Note
The filter in the dust container should be
changed every six months or sooner if neces-
sary.
The exhaust air filter should be replaced every
six to nine months or sooner if necessary.
22 ENGLISH
­ ____________________________________
Troubleshooting
The appliance is equipped with a fuse disconnec-
tor, which automatically switches off the motor if
it overheats. In this case, complete the following
steps:
1­­
2­­
3­­
4­­
5­­
6­­
7­­
Storage
The appliance should be stored in the position as
pictured below.
Frequent washing results in filter wear and tear.
S witch off the appliance and disconnect the
mains plug from the wall socket.
L ook for the cause of the overheating (blocked
hoses/tubes, dirty filter etc.).
R emove any blockages, if necessary change
the dust bag or clean the filter.
L eave the motor to cool for approx 30 to 40
minutes.
T hen reconnect the appliance and switch on. It
should work now.
I f the appliance cannot be switched on, wait
for 20 minutes and then try again.
I f the appliance still won't work, please contact
your dealer or the GRUNDIG service centre.
Tabla de contenido
loading

Tabla de contenido