Kohler K-11344 Guía De Instalación Y Cuidado página 11

Apply plumbers putty.
7. Secure the Drain to the Bath
CAUTION: Risk of property damage. Make sure a watertight seal exists on all bath drain
connections.
CAUTION: Risk of product damage. Do not kink or cause damage to the cable on the bath drain during
installation.
Remove the drain from the bath shell.
Secure the Drain Elbow
Apply plumbers putty to the underside of the flange.
Set the flange on top of the drain outlet of the bath.
Apply silicone sealant to the underside of the drain gasket, then place the drain gasket on top of the
drain elbow.
Insert the nut through the center of the flange and onto the threaded cylinder in the drain elbow.
Handtighten the nut onto the threaded cylinder. Do not wrench tighten at this time.
Remove any excess putty around the flange.
Secure the Overflow Elbow
Align the overflow elbow to the outside of the overflow outlet of the bath.
Insert the nut through the recessed side of the backplate.
Insert the nut with backplate onto the threaded cylinder of the overflow elbow.
Turn the nut clockwise until hand-tight to secure the nut with backplate to the threaded cylinder.
Do not wrench tighten at this time.
Kohler Co.
Nut
Flange
Drain Outlet
Drain Gasket
Threaded Cylinder
Drain Elbow
11
Overflow Elbow
Threaded Cylinder
Overflow Seal
Backplate
Nut
Overflow Outlet
1220597-2-A