Installation Of Light Kit Assembly - Emerson ASHLAND CF717AP02 El Manual Del Propietario

12. Installation of Light Kit Assembly

12.1
Engage the Color-Coded Connector of the Light Kit
Assembly with the Motor Connector (Figure 28).
The Two Connectors are keyed and Color-Coded and
must be mated correctly (color-to-color) before they can
be engaged.
Make sure the Connector Latch closes properly.
12.2
Remove the Three Switch Housing Plate Screws and
retain for future use. (Figure 29).
12.3
Align the Light Kit Assembly Holes with the Switch
Housing Plate Holes.
Carefully tuck all the Wwires and Connectors into the
Switch Cup Housing.
Secure the Light Kit Assembly by reinstalling the Three
previous removed Screws (Figure 30).
WARNING
!
To avoid possible fire or shock, do not pinch wires
between the light kit assembly and the switch cup
plate.
MOTOR COLOR-
CODED CONNECTOR
Figure 28
REMOVE & RETAIN
SWITCH HOUSING
PLATE SCREWS (3)
Figure 29
REINSTALL SWITCH
HOUSING PLATE SCREWS (3)
LIGHT KIT
ASSEMBLY
Figure 30
18
LIGHT KIT
ASSEMBLY
COLOR-CODED
CONNECTOR
SWITCH HOUSING
PLATE
ETL Model No.: CF717-2