Installing Ceiling Cover On Fan Motor Housing - Emerson ASHLAND CF717AP02 El Manual Del Propietario

4. Installing Ceiling Cover on Fan Motor Housing

4.1
Remove and retain Six Screws and Lockwashers from
the top of the Motor Housing (Figure 8A).
4.2
Remove the paper backing off the Rubber Gasket
(supplied in parts bag) to expose the adhesive.
Position the Rubber Gasket on the Motor Housing
(small holes in gasket centered over the screw holes in
the housing and the notched area of the rubber gasket
over the notched area of the housing).
Press the Rubber Gasket (adhesive side down) onto
the Motor Housing to secure Gasket (Figure 8B).
4.3
Gently pry the Decorative Cap from the Ceiling Cover
to expose the Six Holes in the Ceiling Cover (Figure 9).
4.4
Place the Ceiling Cover onto the Motor Housing
Assembly by aligning the Holes in the Ceiling Cover
with the Holes in the Motor Housing (Figure 10).
Secure the Ceiling Cover to the Motor Housing
Assembly by reinstalling the previously removed Six
Screws and Lockwashers (Figure 10).
(For Close-to-the-Ceiling Mounting)
REMOVE SCREWS (6)
Figure 8A
CEILING COVER
HOLES (6)
CEILING COVER
DECORATIVE CAP
Figure 9
CEILING COVER
HOLES (6)
CEILING COVER
MOTOR HOUSING
ASSEMBLY HOLES (6)
Figure 10
8
INSTALL GASKET
Figure 8B
CEILING COVER
CEILING COVER HOLES (6)
CUT-AWAY
SCREWS AND
LOCKWASHERS
(6)
ETL Model No.: CF717-2