Troubleshooting - IKEA LAGAN Manual De Usuario

Ocultar thumbs Ver también para LAGAN:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

TROUBLESHOOTING

Before calling for service, review this list. It may save you both time and expense.
This list includes common experiences that are not the result of defective
workmanship or material in your dishwasher.
Concern
Food Soils Left on Dishes
Dishes not Dry
16
Common Solution
Choose another cycle for longer washing time.
Check rack loading section for proper loading-
avoid nesting items.
Do not overload the dishwasher (See Preparing
and Loading Dishes).
Check to verify that the glass trap is maintained
and installed properly (See Care and Cleaning)..
Home water pressure may be too low-should be
20 to 120 pounds per square inch (psi).
Check incoming water temperature. It should
be about 120°F (49°C). (See Factors Affection
Performance.)
Check water hardness. For extremely hard water,
it may be necessary to install a water softener.
(See Detergent Chart).
Use Fresh Detergent.
Make sure items are not blocking the spray arms,
preventing them from rotating.
By selecting Heat Dry, this will improve drying.
Make sure the rinse aid dispenser is filled.
Increase the discharge setting of rinse aid. (See
Rinse Aid).
Check the incoming water temperature. Be sure it
is at least 120°F (49°C).
Check for proper loading-avoid nesting items.
Plastic items may need to be towel dried.
Cups with a concave bottom will collect water.
Load them at the far left of the upper rack so
they will be held in a tilted position.
Containers, bowls, pots/pans, and any dishware
with concave surfaces that can collect water
should be placed in the rack facing or angled
down so that water is able to drain even from the
lowest point.
EN
Tabla de contenido

Solución de problemas

loading

Tabla de contenido