Dismantling; Dismantling The Ligation Instrument; Removing The Blade With The Insertion Aid (Only For Nightknife With Exchangeable Blade) - Bowa NightKNIFE Manual De Instrucciones

6 Dismantling

6.
6.1.
6.2.
6.2.
28 NightKNIFE / Ligator
Dismantling
Pos: 10 /679-BOWA/HF-Instrumente/Ligator "NightKNIFE"/6.1 Demontage des Ligationsinstruments @ 5\mod_1277986236871_6.doc @ 40729 @ 2

Dismantling the ligation instrument

1. 2. 1. Press and hold the buttons C4 and the locking lever C2 Disconnect the HF cable D from the handle C.
on the handle C, then pull the handle off the shank
2. Press and hold the buttons C4 and the locking lever C2
tube B.
on the handle C, then pull the handle off the shank
3. 2. Unscrew the jaw insert A from the shank tube B. tube B.
3. Unscrew the jaw insert A from the shank tube B.
3. 4. For NightKNIFE with exchangeable blade: Using the
insertion aid E, remove the blade (see section 6.1,
4. For NightKNIFE with exchangeable blade: Using the
page 28).
insertion aid E, remove the blade (see section 6.1,
page 28).
Pos: 11 /679-BOWA/HF-Instrumente/Ligator "NightKNIFE"/6.2 Einwegklinge entfernen @ 5\mod_1277986427699_6.doc @ 40747 @ 2
Removing the blade with the insertion aid
Pos: 11 /679-BOWA/HF-Instrumente/Ligator "NightKNIFE"/6.2 Einwegklinge entfernen @ 5\mod_1277986427699_6.doc @ 40747 @ 2
Removing the blade with the insertion aid
(only for NightKNIFE with exchangeable
(only for NightKNIFE with exchangeable
blade)
blade)
1. Rotate the jaw insert A with the fixed jaw A1 facing
upward to open the jaws.
1. Rotate the jaw insert A with the fixed jaw A1 facing
upward to open the jaws.
2. Grasp the insertion aid E1 firmly by the sides and slide it
onto the fixed jaw A1 in the arrow direction until it
2. Grasp the insertion aid E1 firmly by the sides and slide it
reaches the stop.
onto the fixed jaw A1 in the arrow direction until it
reaches the stop.
MN031-447-S1 EN
MN031-447-S0-20101217-EN