B.A. International BA ULTIMATE POWER+ Instrucciones De Uso página 48

6556042.book Seite 46 Freitag, 15. April 2016 3:13 15
8 Maintenance
D E F G
H
I
46
Operating Instructions BA ULTIMATE POWER+
4. Remove the lamp holder (G) from the coupling fitting. To do this, lift
the lamp holder at the corner (F) using a fingernail.
NOTICE! Take care that the contact pin (D) does not become bent
or damaged at the coupling fitting.
5. Pull the defective bulb (E) out of its base.
6. Insert the new bulb. Ensure the proper position of the contact
surface.
7. Wipe the bulb with a clean cloth.
8. Insert the lamp holder. In doing so, pay attention to the contact pin.
9. Carefully push in coupling fitting up to marking line (H).
 The arrow on the coupling fitting and the dot on the handpiece
must face each other (I).
10.Insert the end sleeve and screw it tight with the tool.
65 56 042 D3560.201.08.02.02