Accessing The Control Unit Settings - V2 FORTECO 2500-I Manual Del Usuario

• Times being more than 10 minutes will be viewed as follows:
each time you press key, current time value increases of half a
minute; vice versa, each time you press the i key, current time
value decreases of half a minute.
By holding down the key, you can quickly increase the time
value, up to reach the max. value allowed for this item. Vice
versa, by holding down the i key, you can quickly decrease
the time value down to reach 0.0 ".
In some circumstances, setting the value to 0 means that the
relevant function is disabled, in this case, 'no' will appear instead
of 0.0 ".
By pressing on OK you will confirm the displayed value and
you will return to the configuration menu.
Value menu setup
Value menus are similar to time menus; however, the setup value
can be any number.
or i keys, the value will increase or
By holding down
decrease slowly.
By pressing on OK you will confirm the displayed value and
you will return to the configuration menu.
6 - ACCESSING THE CONTROL
UNIT SETTINGS
1. Press and hold the OK key until the display shows the menu
desired
2. Release the OK key: the display will show the first item in the
sub-menu
-PrG Programming the control unit (full menu)
-Cnt Cycle counter
-APP Self-learning of working times
-Inv Inverter board functional test
-dEF Loading the default parameters
WARNING: in case no operation is carried out for
more than one minute, the control unit exits from the
programming mode without saving any of your setups and
changes, which will get lost.
53