Ironing Without Steam; Other Features - Philips Azur GC4043 Manual Del Usario

ENGLISH
6
4 Put the mains plug in an earthed wall socket.
C
5 When the amber temperature pilot light has first gone out,
wait for a while before start ironing.
The amber pilot light will come on from time to time during ironing.
B
For Auto-shut-off versions (Type GC4043, GC4040, GC4038,
GC4035, GC4033, GC4030)
If the Auto-shut-off is activated (red pilot light blinks), move the iron
slightly to deactivate it (blinking stops).
Steam-ironing
Make sure that there is enough water in the water tank.
1 Set the temperature control to the recommended position.
See section 'Setting the temperature'.
C
2 Set the steam control to the appropriate steam position.
- 1 - 3 for moderate steam (temperature settings 2 to 3)
- 4 - 6 for maximum steam (temperature settings 3 to MAX)
Steaming will start as soon as the set temperature has been reached.
B

Ironing without steam

1 Set the steam control to position O (= no steam).
2 Set the temperature control to the recommended position.
See section 'Setting the temperature'.

Other features

Spraying
To remove stubborn creases at any temperature.
Make sure that there is enough water in the water tank.
C
1 Press the spray button a couple of times to moisten the
laundry.