Combinations Of Guide Bars And Saw Chains; Stihl Mse 141 C - Stihl MSE 141 C Manual De Instrucciones

23 Combinations of Guide Bars and Saw Chains

23 Combinations of Guide Bars and Saw Chains

23.1 STIHL MSE 141 C

Pitch Drive link gauge/
Groove width
0.043 in.
1/4" P
(1.1 mm)
0.043 in.
3/8" P
(1.1 mm)
The guide bar and saw chain combinations listed above meet the 45° computed kickback angle requirement
of UL 60745-2-13 (for Canada: CSA Z 62.3) when used on this model chain saw with the matching chain sprocket listed
above.
Use replacement guide bars or saw chains only as listed above or as listed elsewhere by STIHL as conforming with the 45°
computed kickback angle requirement of UL 60745-2-13 (for Canada: CSA Z 62.3) when used on this model chain saw.
The listed guide bars are green-labeled reduced kickback STIHL guide bars. The listed saw chains are green-labeled low
kickback STIHL saw chains.
Since new bar/chain combinations may be developed after publication of this manual, ask your authorized STIHL servicing
dealer for the latest STIHL recommendations.
0458-729-8621-A
Length Guide Bar
10 in. (25 cm)
12 in. (30 cm) Rollomatic E Mini
14 in. (35 cm)
12 in. (30 cm)
14 in. (35 cm) Rollomatic E Mini
16 in. (40 cm)
Number of teeth Drive link
of sprocket count
56
8 64
72
45
7 50
55
English
Saw chain
71 PM3 (Type 3670)
61 PMM3
(Type 3610)
49