21 Bar and Chain Combinations
MSA 140 C
STIHL recommends wearing ear defenders.
– Sound pressure level L
to EN 60745‑2‑13: 83 dB(A)
– Sound power level L
EN 60745-2-13: 94 dB(A)
– Vibration level a
measured according to
hv
EN 60745-2-13:
– Control handle: 4.8 m/s²
– Front handle: 4.3 m/s².
The vibration levels indicated were measured
according to a standardized test method and can
be used as a basis for comparing electric power
tools. The vibration levels actually occurring may
vary from the values indicated, depending on the
type of application. The vibration levels indicated
21 Bar and Chain Combinations
21.1
STIHL MSA 120 C, MSA 140 C Chainsaws
Pitch
Drive link
gauge/groove
width
1/4" P
1.1 mm
The cutting length of a guide bar depends on the chainsaw and the saw chain being used. Actual cut‐
ting length may be less than the specified length
22 Spare Parts and Accesso‐
ries
22.1
Spare parts and accessories
These symbols indicate original STIHL
spare parts and original STIHL acces‐
sories.
STIHL recommends the use of original STIHL
spare parts and accessories.
Despite ongoing market observation, STIHL is
unable to judge the reliability, safety and suitabil‐
ity of other manufacturers' spare parts and
accessories; accordingly, STIHL cannot warrant
for the use of those parts.
Original STIHL spare parts and original STIHL
accessories are available from STIHL dealers.
23 Disposal
23.1
Disposal of Chain Saw, Battery
and Charger
Contact your STIHL servicing dealer for informa‐
tion on disposal.
0458-716-9821-E
measured according
pA
measured according to
wA
Length
Guide bar
25 cm
Rollomatic E Mini
30 cm
Rollomatic E Mini
can be used for an initial estimate of the vibration
stress. The actual vibration stress has to be esti‐
mated. The times when the electric power tool is
switched off and the times when it is switched on
but running under no load can be taken into
account in the estimate.
For information on compliance with Employers'
Vibration Directive 2002/44/EC see
www.stihl.com/vib.
20.8
REACH
REACH is an EC regulation and stands for the
Registration, Evaluation, Authorisation and
Restriction of Chemical substances.
For information on compliance with the REACH
regulation see www.stihl.com/reach.
Nose spro‐
Number of
cket teeth
drive links
8
► Dispose of the saw, guide bar, saw chain, bat‐
tery, charger, accessories and packaging in
accordance with local regulations and environ‐
mental requirements.
24 EC Declaration of Con‐
formity
24.1
STIHL MSA 120 C, MSA 140 C
Chainsaws
ANDREAS STIHL AG & Co. KG
Badstraße 115
D-71336 Waiblingen
Germany
declare under our sole responsibility that
– Category: Cordless chainsaw
– Manufacturer's brand: STIHL
– Model: MSA 120 C, Serial identification: 1254
– Model: MSA 140 C, Serial identification: 1254
conforms to the specifications of Directives
2011/65/EU, 2006/42/EC, 2014/30/EU and
2000/14/EC and has been developed and built in
compliance with the versions of the following
standards valid at the production date:
English
Saw chain
56
71 PM3 (Type
3670)
64
61