Safety Symbols On The Product; Chain Saw - Stihl MSE 141 C Manual De Instrucciones

English
3 Chain Catcher
Helps contain the saw chain and reduce the risk of
operator contact in the event the chain breaks or comes
off the bar.
4 Nut
Tightens the chain sprocket cover to the chain saw.
5 Chain Sprocket
Drives the saw chain.
6 Side Chain Tensioner
Permits precise adjustment of saw chain tension.
7 Reset Button for Overload Cutout
Resets the overload circuit breaker.
8 Front Hand Guard
Helps protect the operator's left hand from projecting
branches and contact with the saw chain. Serves as the
activation lever for the chain brake.
9 Bumper Spike
Helps hold the saw steady against the tree, log or limb
during cutting.
10 Guide Bar
Supports and guides the saw chain.
11 Saw Chain
Toothed cutting tool consisting of cutters, tie straps and
drive links.
12 Front handle
Handle for the operator's left hand.
13 Oil Filler Cap
Closes and seals the bar and chain oil tank.
14 Trigger Switch Lockout
Prevents activation of the trigger switch until depressed.
15 Trigger Switch
Switches the motor on and off.
16 Rear Handle
Handle for the operator's right hand.
4
17 Oil Sight Glass
Shows the bar and chain oil level.
18 Power Supply Cord
Supplies the chain saw with electricity when connected
to a wall outlet (power supply).
19 Plug
Connects the power supply cord to an extension cord.
20 Chain Scabbard
Covers the guide bar and saw chain to reduce the risk of
injury from inadvertent contact during transportation and
storage.
# Rating Plate
Contains electrical information and the product's serial
number.

4 Safety Symbols on the Product

4.1

Chain Saw

The following safety symbols are found on the chain saw:
To reduce the risk of injury, follow the specified
safety precautions.
Read and follow all safety precautions in the
instruction manual. Improper use can lead to
serious or fatal personal injury or property
damage.
To reduce the risk of eye, ear and head injury,
always wear proper eye protection, hearing
protection and an approved protective helmet,
@ 6.3.
Avoid contact of the bar tip with any object. This
can cause the bar to kick suddenly up and back,
which may result in serious or fatal injury. Always
use two hands to operate the saw, @ 7.
4 Safety Symbols on the Product
0458-729-8621-A