Olympia CC 310.4 Manual De Usario página 18

Paper Shredder CC 310.4 / MC 306.2
Appendix
Overheating Protection
The motor switches off automatically in the event of overheating and overloading.
The Overheating LED lights up red.
1. Turn the rotary knob to OFF and set the main switch to
2. Disconnect the power plug from the power socket.
3. Allow the motor to cool down before starting the device up again.
After cooling down, the full performance of the device is available again.
Pay attention to the permissible operating cycle (refer to Technical Data).
Appendix
Regular Maintenance and Service
Switch the device off and disconnect the power plug from the power socket
prior to cleaning it.
Clean any dust from the device with a clean, soft brush or a soft, lint-free cloth.
Do not use any solvents or cleaning agents.
Oil the shredder's cutting mechanism at regular intervals (refer to Lubricating
the Cutting Mechanism).
Technical Data
Cutting capacity
Cutting method
Security level
Cutting speed
Operating cycle
Noise level
Dimensions (L x W x H)
Weight
Waste bin
Range of operations
18
CC 310.4
Max. 10 sheets of A4
(80 g/m²)
Cross-cut
4 x 38 mm
P-4
1.8 m/min.
Approx. 3 min. continu­
ous operation,
30 min. cool down phase
Approx. 72 dB
426 x 220 x 485 mm
6.2 kg
Automatic start / stop, reverse running
Gi
(Off).
MC 306.2
Max. 6 sheets of A4
(80 g/m²)
Particle-cut
(micro.cut), 2 x 15 mm
P-5
1.6 m/min.
Approx. 6 min. continu­
ous operation,
60 min. cool down phase
Approx. 62 dB
7 kg
Approx. 19 litres