Keyboard Functions - METRICA 60719BM Manual Del Usuario

OPERATING MANUAL
MAIN BODY
LASER MODULE
KEYBOARDS
SCANNER
LED
ON/OFF

KEYBOARD FUNCTIONS

1. ON/OFF: Control of the power state.
2. Power indicator: When it is lit, the unit starts.
3. Mode indicator: When it is lit, the instrument levels manually. If
WINDOWS OF BEAM
4. Tilt function: warns the user of a misalignment of the instrument.
5. Tilt function LED: if the LED flashes slowly, it is in tilt mode.
6. Speeds: there are 5 to choose from: 0-60-120-300-600-0 rpm.
7. Scanner: the scanning angle is 5 steps: 0-10°-45°-90°-180°.
HANDLE
Note: You can use the remote control to access additional
functions.
OPERATION
Inserting the battery
1. 4×C size Ni-MH batteries can be used in the unit.
2. Remove the cover of the battery compartment on the bottom
INFRARED RECEIVER
3. Insert the batteries into the housing according to the right
VELOCITIES
TILT LED
4. Place the cover on the battery compartment and tighten all
TILT FUNCTION
MANUAL / AUTOMATIC
Positioning the unit
Place the unit on a tripod or stable flat surface or even hang it on
it flashes, it remains in alarm standby mode (the instrument's
inclination is outside the levelling range).
When the LED flashes rapidly, the instrument stops leveling.
of the unit.
electrode.
screws.
7