Installing The Ceiling Arm - Dräger Polaris 50 Manual De Usuario

3.5

Installing the ceiling arm

WARNING

Risk of injury if the spring-balanced arm should jump

Do not remove the transport guard until after the
luminaire head has been installed.
B
A
C
Carefully turn the covers "A" and remove them from the

joint cover "B".
Loosen the screws "C" and remove the joint covers "B"

from the transverse boom.
D
Carefully remove the rotary plug "D".


Insert the ceiling arm into the ceiling tube.
A
After inserting the ceiling arm, first install the ring "A",

then the locking ring "B", followed by the end rings "C".
D
Carefully insert the rotary plug "D".

B
A
C
Attach the joint covers "B" and fit screws "C".

Insert the covers "A" and turn to secure.


To proceed with the installation of the luminaire head,
see Chapter 6.
ENG
A
B
C
A
29