Blumfeldt Loras Manual Del Usuario página 13

Place the heating head on the upper pipe and fix it with the 2 screws.
5
Attach the power cable to the base
plate with 4 nuts.
OPERATION
Insert the plug into the socket. Select the desired heating setting with the
switch on the heating head:
(I) 900 W
(II) 1200 W
Note: Although the heater is protected against splashing water, it should not
be used in rain or wet conditions. Always unplug the heater from the power
outlet after use.
4
(I+II) 2100 W
(0) Heizung aus
EN
13