Changing The Brightness Of The Front Panel Display And Indicators (Dimmer); Saving Power Consumption; Saving Power In Standby Mode - Sony HT-S40R Manual Del Usuario

Changing the Brightness
of the Front Panel Display
and Indicators (DIMMER)
You can change the brightness of the
following.
• Front panel display
• BLUETOOTH indicator
• Power indicator on the wireless
amplifier
1
Press DIMMER repeatedly to select
the desired setting.
Front panel
display
[BRIGHT]
[DARK]
[OFF]
Note
The front panel display is turned off when
[OFF] is selected. It turns on automatically
when you press any button, then turns off
again if you do not operate the speaker
system for about 10 seconds. However, in
some cases, the front panel display may
not turn off. In this case, the brightness of
the front panel display is same as [DARK].
34
US
DIMMER
Function
The front panel
display and indicators
light brightly.
The front panel
display and indicators
light darkly.
The front panel
display is turned off.
Saving Power
Consumption
To use the speaker system with saving
power consumption, change the
following settings.
Turning the Speaker System
Off by Detecting the Using
State
When you set the auto standby function
to on, the speaker system enters
standby mode automatically when you
do not operate the speaker system for
about 20 minutes and the speaker
system is not receiving an input signal.
1
Set [SYSTEM] – [AUTO STANDBY] to
[ON].
Saving Power in Standby
Mode
To save power consumption during the
standby mode, set [BT] - [STANDBY] to
[OFF] (page 32).