Changing The Factory Setting Of A Function Button On The Remote; Setting Up The Speakers - Sony HT-K25 Manual De Instrucciones

Changing the factory
setting of a function button
on the remote
If the factory settings of the function buttons on
the remote do not match your system
components, you can change them. For
example, if you have an MD player and you do
not have a DVD player, you can assign the
DVD button to your MD deck.
1
Hold down one of the function buttons
on the remote (VIDEO/DVD/SAT/TV/
AUX/TUNER) whose function you want
to change.
Example: Hold down DVD.
2
Press the corresponding button of the
component you want to assign to the
Function button.
Example: Press m (for MD deck).
The following buttons are assigned to select
the functions:
To operate
VCR (command mode VTR 1*)
VCR (command mode VTR 2*)
VCR (command mode VTR 3*)
DVD player
TV
DSS (Digital Satellite Receiver)
Tuner
CD player
MD deck
LD player
* Sony VCRs are operated with a VTR 1, 2 or 3
setting. These correspond to Beta, 8mm and
VHS respectively.
To reset all the function buttons to
their factory setting
Press ?/1, AV ?/1 and MASTER VOL – at
the same time.
GB
24

Setting up the speakers

Use the SET UP menu to set the types of the
speakers connected to the subwoofer.
1
Press MAIN MENU repeatedly to select
SET UP menu.
2
Move the V/v/B/b button up or down
to select the parameter.
3
Move the V/v/B/b button to left or
right to select the setting.
4
Repeat steps 2 and 3 to adjust the other
parameters.
Speaker setup parameters
The initial setting is underlined.
x Front speaker distance (
Initial setting: 3.5 m
Lets you set the distance from your listening
position to the front speakers (A on page 9).
You can adjust from 1.0 meter to 10.0 meters
in 0.1 meter steps.
Press
If both front speakers are not placed an equal
1
distance from your listening position, set the
2
distance to the closest speaker.
3
4
5
6
0/10
12
m
M
DIS.)
L R