Taurus I603MT Manuel De Instrucciones página 25

- Hold the "-" or "+" control of the timer to decrease or increase by 10 minutes.
4. To cancel the timer, touch the "-" or "+" controls of the timer, and scrolling down to "0", the timer is
cancelled, the "00" will show in the minute display, then and then "--".
5. When the time is set, it will begin to count down immediately. The display will show the remaining
time and the timer indicator will flash for 5 seconds.
6. Buzzer will make a sound for 30 seconds and the timer indicator shows "--" when the setting time
finished.
Setting the timer to turn one cooking zone off
Cooking zones set for this feature will:
1. Touch the "-" or "+" control of the heating zone that you want to set the timer for.
2.Touch the "-" or "+" control of the timer, the minder indicator will start flashing and "30" will show in
the timer display.
3. Set the time by touching the "-" or "+" control of the timer:
- Touch the "-" or "+" control of the timer once will decrease or increase by 1 minute.
- Touch and hold the "-" or "+" control of the timer will decrease or increase by 10 minutes.
4. To cancel the timer, touch the "-" or "+" of heating zone, and then touch the "-" of timer and scroll it
down to "0", the timer is cancelled, and the "00" will show in the minute display, and then "--".
5. When the time is set, it will begin to count down immediately. The display will show the remaining
time and the timer indicator flash for 5 seconds.
NOTE: The red dot next to power level indicator will illuminate indicating that zone is selected.
6. When cooking timer expires, the corresponding cooking zone will be automatically switched off and
it will show "H".
Other cooking zone will keep operating if they are turned on previously.
Setting the timer to turn more than one cooking zone off
1. If you use the timer function in more than one heating zone the timer indicator will show the shortest
time.
NOTE: The flashing red dot next to power level indicator means the timer indicator is showing time of
the heating zone.
If you want to check the set time of other heating zone, touch the heating zone selection control. The
timer will indicate its set time.
2. When cooking timer expires, the corresponding heating zone will be automatically switch off and it
will show "H".
NOTE: If you want to change the time after the timer is set, you have to start from step 1.
Detection of Pan and Small Articles
For induction hob, if display flashes" "alternately with heat setting.
• you have not placed a pan on the correct cooking zone or,
• the pan you're using is not suitable for induction cooking or,
• the pan is too small or not properly cantered on the cooking zone.
Notes:
1. No heating takes place unless there is a suitable pan on the cooking zone.
2. The display will auto turn off after 2 minutes if no suitable pan is placed on it.
3. When an unsuitable size or non-magnetic pan (e.g. aluminum), or some other small item (e.g. knife,
fork, key) has been left on the hob, the hob will automatically go on standby in 1 minute. The fan will
keep cooling down the induction hob for a further minute.
Residual Heat Warning
Beware of hot surfaces